The reinforced graphite gasket is composed of a metal punching plate and a flexible graphite (particle) plate, which are then cut or sheared.
Excellent corrosion resistance, high shrinkage and low temperature resistance, good compression elasticity and high strength, punching and cutting into various shapes of gasket, for contact sealing surface accuracy is not high. The preload is low and will not adhere to the sealing surface. Tooth plate reinforced high-strength graphite gasket is an improvement of pure cutting gasket. The inner and outer diameter of the gasket is covered with metal tape. The commonly used edge material is 304 or 316 stainless steel. It can not only keep the excellent performance of the original gasket, but also be easy to install and disassemble, not easy to damage. At the same time, it can prevent the medium from eroding the gasket, improve the pressure resistance, and have good corrosion resistance, high / low temperature resistance, good compression resilience and high strength.
Purpose:
Widely used in petrochemical pipeline, valve, pump, pressure vessel, heat exchanger, condenser, generator, air compressor, exhaust pipe, refrigerator, etc.
Name |
Metal |
filler |
Pressure and temperature |
Nominal diameter |
Texture of material |
Ocr13 |
Flexible graphite |
6.4-10.0Mpa -200~800℃
|
DN50—DN1500
|